deviantART: Popular Sculpture in the last 8 hours

Big Red Dragon - Auction

Fri, 24 May 2013 17:28:18 PDT

I am pretty stoked on this guy. And he's actually not REALLY big, I don't make really large sculpts, but he feels bigger. He's still just 3 inches tall. But there is LOTS of detail packed into him. That mane. Ugh. Ridiculous. Not to mention the wings! I made them extra strong by putting wire mesh inside them. I forgot how much work big wings are

Anyways, this guy is gonna be going up for auction on ebay over the weekend. I'll get him set up tomorrow and give you guys a link

Handmade from colored Premo Sculpey clay, 3 inches tall

________________________________________________________

Commissions are closed indefinitely, but my pricing guide can be found here: [link]

QUESTIONS???
Please visit my FAQ page [link] before asking questions about techniques and materials. Just about every question I get is covered there. I’m not trying to be rude, I just get tired of answering the same questions over and over

Bear Sculpture WIP Poseable

Fri, 24 May 2013 18:17:27 PDT

Regular white Sculpy clay from Walmart.

Tools: Fingers and a needle on a handle-

Bear Sculpture WIP Poseable!

(NOTE) The ears were only temporarily attached to the head just for the photos. Later on they will be attached to the body so they'll be able to bobble about freely.

Enjoy!

Spotted Hyena Male Griffin

Fri, 24 May 2013 18:26:02 PDT

I airbrushed this male griffin with a dark face and spotted pattern, and we thought he looked like a spotted hyena.This sculpture is about 10 inches tall, and he has brown glass eyes.
He was sold on Ebay.
This is a gypsum reproduction of my original sculpture produced by Windstone Editions.

The Dust Collectors

Fri, 24 May 2013 14:50:27 PDT

A couple trucks I've made through the times, all lined up together for a group photo!

Been building lately actually, I don't really play video games too much anymore and the things that kept me busy all this time is pretty much gone now, so I find myself with a lot of free time, and with no distracting thoughts just sitting down on my desk all day sorting lego and building has been very pleasant and relaxing, I'm enjoying things. it's nice.

U.S.S. Enterprise NCC - 1701 - D - 3

Fri, 24 May 2013 17:28:07 PDT

Here are some images of AMT/Round 2 models of the U.S.S. Enterprise NCC - 1701 - D from Star Trek The Next Generation.

Applejack sculpture WIP 2

Fri, 24 May 2013 13:57:45 PDT

here's another pic of Applejack.

U.S.S. Enterprise NCC - 1701 - D - 5

Fri, 24 May 2013 17:29:31 PDT

Here are some images of AMT/Round 2 models of the U.S.S. Enterprise NCC - 1701 - D from Star Trek The Next Generation.

Zekrom

Fri, 24 May 2013 16:52:18 PDT

Zekrom made from polymer clay. Yes I know the tail is smaller than the actual thing, I'm not too fond of the giant generator he has as a tail

Aegidus

Fri, 24 May 2013 14:31:31 PDT

Clay Charms (for sale?) NOPE

Fri, 24 May 2013 15:20:05 PDT

_{stupid freaking ink fading away >.>

I transferred some images to clay. I did this last night with a kitten picture, but it faded over-night :/
It looks like the puppy is fading now, and I don't know how to stop it... I didn't put clear nailpolish on the kitten, but I did on these two. ugh!

So, if I were to sell these, maybe 8 dollars and then plus however much shipping is (I'll need to figure that out.) If the necklace material costs a lot I'll charge for that, too.
comment if you would buy one! I'm still not sure if I can, because my parents wouldn't want me to give my address out :/

Also, Stella is coming with my family and I to Bear Lake! : D yee~

_{***PICTURES FOUND ON GOOGLE IMAGES*** Therefore, they do not belong to me!}}

U.S.S. Enterprise NCC - 1701 - D - 4

Fri, 24 May 2013 17:28:51 PDT

Here are some images of AMT/Round 2 models of the U.S.S. Enterprise NCC - 1701 - D from Star Trek The Next Generation.

U.S.S. Enterprise NCC - 1701 - D - 2

Fri, 24 May 2013 17:27:11 PDT

Here are some images of AMT/Round 2 models of the U.S.S. Enterprise NCC - 1701 - D from Star Trek The Next Generation.

U.S.S. Enterprise NCC - 1701 - D - 1

Fri, 24 May 2013 17:26:34 PDT

Here are some images of AMT/Round 2 models of the U.S.S. Enterprise NCC - 1701 - D from Star Trek The Next Generation.

Giraaaaaaffe

Fri, 24 May 2013 16:21:54 PDT

I know I so rarely actually post my sculptures, but hopefully this summer I'll be able to do a dump of them.

This is a giraffe that I recently sculpted, and before anyone says anything, I realize that there is no tail and no horns. They kept breaking so I gave up on them. It still looks cute though right? x3 I love the ears and just everything.
Also giraffes have really messed up anatomy. I MEAN LOOK AT THIS SLEEPING ONE OMFG [link] so cute

Sculpted out of white clay, then wax resisted the lines in between the spots. Then, I dipped it in scraffito for the rest, and did finishing touches before firing. Then I glazed it clear ^^

keychains 01

Fri, 24 May 2013 15:43:42 PDT

a while ago i did that keychains for =GrauerWolf
it looks a little bit cheesy but it made fun to do that two
a little fennec and an armadillo

done with: wire frame, alufoil, paperclay and acrylics

for one of that i need 2-3 hours to sculpt

charcters ©
art ©

DO NOT USE

Soul Eater Characters

Fri, 24 May 2013 15:49:43 PDT

So, I had to do this math project which I did with , , and another friend. So these are our game pieces. sorry it is a little blurry.
helped me make these.

Just Go - Full View 2

Fri, 24 May 2013 15:55:44 PDT

Another view. I really love GLaDOS' stand that I made. You might be able to tell that it's the same one in all my pictures of GLaDOS and Wheatley, but improved over time. For this diorama I made the black, curved wall to simulate GLaDOS' chamber better. It's also removable!

Other views:
[link]
[link]

Just Go - Full View 1

Fri, 24 May 2013 15:51:48 PDT

A full view of the entire LEGO diorama of the end of Portal 2.

Other views:
[link]
[link]

Just Go

Fri, 24 May 2013 14:20:52 PDT

A new LEGO scene from Portal 2 using my updated GLaDOS.

Other views:
[link]
[link]

AppleJack sculpture WIP 1

Fri, 24 May 2013 13:34:04 PDT

well here's my first Pony sculpture! Applejack! my favorite of the mane six.
this sculpture isn't as nice as the other ones. but its ok, especially since it's my first one.

Hulk

Fri, 24 May 2013 13:21:01 PDT

Here is a Hulk 1/5 scale I sculpted in Sculpey.

Pack hunters

Fri, 24 May 2013 13:04:14 PDT

the only thing worse than meeting a bear in the woods
is meeting these two in the woods.

Mole Man

Fri, 24 May 2013 13:13:37 PDT

1/7 scaled Mole-Man, the Marvel villain sculpted in Sculpey.

Mike Wazowski Sculpture

Fri, 24 May 2013 20:02:46 PDT

Sculpture of Mike from Monsters University.

random wip...

Fri, 24 May 2013 13:40:40 PDT

just something completely random i started while messing with my pieces . . . very doubtful i'll even finish this

Hell Hound (2)

Fri, 24 May 2013 15:38:38 PDT

Mis figuras en Comic Con Santiago 2013

Fri, 24 May 2013 13:35:45 PDT

Durante este fin de semana voy a estar con algunas de mis figuras en el stand de Mythica Ediciones en la comic con Santiago 2013, en Estacion Mapocho, asi que si van a darse una vuelta pasen a saludar y conversamos.

Dragon And Infinity

Fri, 24 May 2013 13:23:33 PDT

Scary instrument ^^

Fri, 24 May 2013 13:18:01 PDT

Tatterwing

Fri, 24 May 2013 13:06:19 PDT

Today I went for a walk and I spotted a tatterwing up in the trees. Probably out trying to catch the attention of a female. I was unable to find it's nest, but I'm sure it's nearby.

Original sculpt by here: [link]

spring 2013

Spheal Sculpt

Fri, 24 May 2013 20:44:07 PDT

For Thank you for being patient! He's so cute and derpy <333 :'D

Enterprise-D 1/2500 scale 4

Fri, 24 May 2013 19:23:36 PDT

AMT/Round 2 Cadet Series 1/2500 scale Enterprise NCC-1701-D

Hunter VS Hunted

Fri, 24 May 2013 18:21:17 PDT

Hunter VS Hunted But which is which?

Tis a turtle!

Fri, 24 May 2013 17:17:02 PDT

I had to do an essay about the animal and then make it out of something. Mine was sea turtle, as you can see I made him outta clay

The canopy of the Harlot

Fri, 24 May 2013 15:39:44 PDT

Open.............or closed?

Enterprise-D 1/2500 scale 6

Fri, 24 May 2013 19:24:51 PDT

AMT/Round 2 Cadet Series 1/2500 scale Enterprise NCC-1701-D

Valley of the wind Gunship

Fri, 24 May 2013 14:53:04 PDT

Nausicaa and the Valley of the Wind was my very first exposure to the incredible works of Hayao Miyazki. I currently own every film he's made. and love every one of them. So here's a little homage featuring a pair of Valley of the Wind Gunships.

T-34/76

Fri, 24 May 2013 14:03:01 PDT

Argued to be the best tank ever, the T-34 saw battles from Berlin to Manchuria, Leningrad to Stalingrad. This model, I painted to be fighting around Kursk in 1943.

Jazz and the GT-40

Fri, 24 May 2013 14:37:25 PDT

Ford GT-40.
6 speed Trans, Rear mounted engine that puts out 550 hp at 6500 rpm
generating 500 lb·ft of torque at 3750 rpm.

Jazz- "I always did like a girl with a little junk in her trunk!"

mig23

Fri, 24 May 2013 13:31:54 PDT

This is my Mikoyan-Gurovich23. It's a soviet fighter-bomber, nicknamed the "flogger-d" by nato. hand made & painted.

Hot Hatch

Fri, 24 May 2013 13:27:44 PDT

a volskwagen golf MK2 in 1/24 scale revell kit

Link's valuable lessen

Fri, 24 May 2013 13:33:25 PDT

Aww aren't you a cute little Tyrann...Uhoh!

Shockwave

Fri, 24 May 2013 13:08:00 PDT

"Your First mistake was coming here Without any logical plan to stop me.
Your second mistake was being noticed!"

Killer Instinct

Fri, 24 May 2013 12:59:51 PDT

Who will win?

Jnk

Fri, 24 May 2013 15:31:43 PDT

NICHOLSON

Krona

Fri, 24 May 2013 13:43:32 PDT

Here is a bust of Krona from DC Comics.

Kyubey (WIP)

Fri, 24 May 2013 20:46:03 PDT

first time sculpting anything... whadda ya think?
gah and all of my cough drop wrappers in the BG ;-;

sailor moon flower and moon symbol

Fri, 24 May 2013 19:34:57 PDT

these are for sell. i can make more and in any color except clear

Giraffe

Fri, 24 May 2013 18:53:02 PDT

HI! Got to try out 3D art C:, this is made from wire, tinfoil, tissue paper and paint. There are leaves in his belly. I love giraffes, and am really glad I got to try some 3D art before the end of the year. The wire piece is called an Armature!

Classic Custom: My Very First

Fri, 24 May 2013 18:14:14 PDT

So, yeah, just like it says, this is my very first custom. I made this in 2004 when I started making them full time. I had Wolverine just sitting there and couldn't figure out who to make first, then I thought, "Hey... Battle ravaged Wolverine." Thus, this was born. Using an Xacto knife, red ink ball marker, a pin, and a pair of pliers, I put this guy together. Looking back, I've improved a lot, but this is still an important piece to me, so enjoy.

Wolverine is copyrighted to Len Wein, Herb Trimpe, Roy Thomas, John Romita Sr., and Marvel Comics.

Dutch Bunny Giraffe and Elephant

Fri, 24 May 2013 16:50:00 PDT

Dutch Bunny for The Giraffe is a design I like more Px and the elephant is cause I want too make an elephant >>

The behind of a bunny (with drawer)

Fri, 24 May 2013 15:19:20 PDT

WoW Inspired Hearth Stone Key chain

Fri, 24 May 2013 13:32:37 PDT

Great for all you Paladins out there who are afraid of world PVP Confrontations, Simply cast Divine Shield then hearthstone out.
Instantly escape the horrors of the "real" world that are just too scary to face alone.

Check out my Etsy shop [link]

Like my facebook for new items and special offers [link]

055

Fri, 24 May 2013 13:22:05 PDT

Our Lady figurine carved in Birch wood, carved the Virgin Mary specifically for first Holy Communion souvenir my cousin.

Figurka Matki Boskiej rzeźbiona w brzozowym drewnie, wyrzeźbiłem tę matkę boską specjalnie na pamiątke pierwszej komuni świętej mojej kuzynki.

008

Fri, 24 May 2013 12:58:09 PDT

A wooden cross carved in pine root, I used the natural bending of the root of the pine and the carved Jesus crucified. A traditional Polish "Doner"

Drewniany krzyż, rzeźbiony w sosnowym korzeniu, wykorzystałem naturalne wygięcie korzenia sosny i z niego wyrzeźbiłem Pana Jezusa ukrzyżowanego. Taki tradycyjny Polski "Świątek"

the wall of Badajoz

Fri, 24 May 2013 12:53:12 PDT

A small sculpture of the walls before the assault on Badajoz 1812.

octopus

Fri, 24 May 2013 12:57:35 PDT

sculpture

Hell Hound (1)

Fri, 24 May 2013 15:25:51 PDT

Decapitated zombie head sculpture

Fri, 24 May 2013 13:02:12 PDT

Finally finished my decapitated zombie head sculpture. Took much longer then it should have but im happy with it. It's a life size scultpure made with chavant. I made a made á plaster mold and i have a latex copy of it but i havent finished it yet but will have that up soon too

Marcusfenix1

Fri, 24 May 2013 15:30:15 PDT

FENIX